in外设 - 分享外设精彩

标题: 23g+8000HZ的M1K了解一下 [打印本页]

---

作者: 花开月满    时间: 2019-10-6 20:25
标题: 23g+8000HZ的M1K了解一下
参数如下

• Product name: M1K
• Number of buttons: two (left button, right button)
• Weight: 23 g
• Height: 30 mm
• Length: 79 mm
• Width: 60 mm
• MCU: Microchip ATmega32U2
• Firmware: Open-source
• Sensor: PixArt 3360
• Maximum CPI: 12000
• Default CPI: 800 (changeable in increments of 100)
• Maximum IPS: 250
• USB rate: 1,000 Hz (overclockable to 8,000 Hz)
• Switches: Omron D2F-01F
• Switch latency: 0 (press and release)
• Cable diameter: 2.5 mm
• Top shell: Aerograde carbon fiber
• Bottom shell: 3D printed fractal honeycomb ABS
• Screws: Torx (9 × T6)
• Mouse feet: 4 Hyperglide PTFE with rounded edges (Ø = 7 mm; height = 0.65 mm)
• 
  
• 8000HZ输入延迟离散表现
  

---

作者: phoenixelf    时间: 2019-10-7 08:46
看着没手感可言

---

作者: 在寂寞中季节    时间: 2019-10-7 09:21
这也太。。没意思了

---

作者: watercooled    时间: 2019-10-8 17:59
这外形值得考究下

---

作者: laomu0515    时间: 2019-10-11 22:06
23g    

---

欢迎光临 in外设 - 分享外设精彩 (http://www.inwaishe.com/)

Powered by Discuz! X3.1